Savin MLP26 Printer User Manual


 
Appendix
162
7
Memory Unit TypeB 64MB
Module Type:
SO-DIMM (Small Outline Dual-in-line Memory Module)
Memory Type:
SDRAM (Synchronous Dynamic RAM)
Number of Pins:
144 pins
Network Interface Board Type 2610
Topology:
Ethernet (10BaseT/100BaseTX)
Protocols:
TCP/IP, NetBEUI, IPX/SPX, AppleTalk
Interface Connector:
RJ45
Required Cable:
STP (Shielded Twisted-Pair) cable
Category / Type5 or better
1394 Interface Unit Type 4510
Transmission Spec.:
IEEE 1394
Device Class:
SCSI print, IP over 1394
Interface Connector:
IEEE 1394 (6 pins × 2)
Required cable:
1394 interface cable (6 pins x 4 pins, 6 pins x 6 pins)
Important
You cannot plug devices together to create loops.
Do not use a cable more than 4.5 meters (14.8 feet) long.
Connectable number of device in a bus:
Maximum 63