Filter
Top Products
107KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual
For example, if the KVM switch has an IP address of 192.168.1.180, log into your router's setup program
and access the Port Forwarding (sometimes referred to as Virtual Server) configuration page. Specify
192.168.1.180 for the IP address and the port number you want opened for it (9000 for internet access,
for example).
Configuration setup can vary. Refer to the router's User Manual for specific information on configuring
port forwarding.
PPP Modem Operation
An external modem (customer supplied) is used with the KVM switch. An APC serial adapter (provided)
connects the switch to the modem.
Basic Setup. The KVM switch can be accessed through its RS-232 port using a PPP dial-in connection:
1. Set up your hardware configuration to match the diagram:
2. From your client computer, use your modem dial-in program to dial into the KVM switch's
modem.
Note: If you don't know the KVM switch modem's serial parameters, get them from
the KVM administrator.
3. Once a connection is established, open your browser, and specify 192.168.192.1 in the URL box.
4. The default username and password are blank.
5. For the modem session, the KVM switch has an IP address of 192.168.192.1; the user side has an
IP address of 192.168.192.101.
6. From here, operation is the same as if you had logged in from a browser or with the AP programs.
aem0382a
LAN 2 PDU 2
LAN 1 PDU 1
Adapter
Modem
Modem
Remote
User
Phone Line