Filter
Top Products
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 54
Port Level Browser GUI Interface
Port access settings:
Device Level AP GUI Interface
The page is the same as for the Browser GUI except that there are filters at the top of the columns to
expand or limit the scope of the users and groups.
Port Level AP GUI Interface
The page is the same as for the Browser GUI except that there are filters at the top of the columns to
expand or limit the scope of the users and groups displayed.
Setting Function
Name Each port accessible to the user is listed under the Names column.
Access Device access rights are set from the Access column. To see the choices, click the icon in the row
that corresponds to the user you want to configure.
Full Access The user can view the remote screen and can perform operations on the remote
server from his keyboard and monitor.
View Only The user can only view the remote screen. He cannot perform any operations on it.
No Access No access rights - the Port will not appear on the User's list on the Main Screen.
Mount USB Configure permissions to mount Virtual Media devices on remote servers. To see the choices, click
the icon in the row that corresponds to the user you want to configure. The icons are the same as in
the Access column.
• Full Access: the user can mount, read, and write to the virtual media.
• View Only: the user can view the contents of the virtual media. No operations can be performed.
• No Access: the user will not see the virtual media even if it has been configured on the remote
system.
Note: The entry does not appear for switches that do not support the USB Virtual Media function.
Config Set or deny permission for the user to change a port's configuration settings. A check mark indicates
that the user has permission. An X means the user does not have permission.
PDU Permit or restrict the configuration and power operation of ports that have PDU devices connected.
A check mark shows that the user has permission. An X means the user does not have permission.
Filter Description
Name To filter the User or Group name, enter the name, partial name, or partial name and wild
card, then press Enter. Only the Users and Groups whose names correspond to the entry
appear in the list. Wildcards (? for single characters, * for multiple characters) and the
keyword “or” are supported. See page 59 for an example.
Config All All Users and Groups appear in the list.
Permitted Only Users and Groups with configuration permissions appear in the list.
Restricted Only Users and Groups that do not have configuration permissions appear in the list.
Setting Function
Name To filter the User or Group name, enter the name, partial name, or partial name and wild
card ( * ) then press Enter. Only the Users and Groups whose names correspond to the
entry appear in the list.
Access All All Users and Groups appear in the list.
Full Access Only Users and Groups with Full Access permissions appear in the list.
View Only Only Users and Groups with View Only permissions appear in the list.
No Access Only Users and Groups with No Access permissions appear in the list.