Filter
Top Products
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 84
Toolbar icons
Toolbar Hotkey Port Switching
When the toolbar is displayed, hotkeys can be used to provide KVM focus to a port directly from the
keyboard.
• Go directly to a port by entering its port number and clicking Enter.
• Auto Scanning
• Skip Mode Switching
The hotkeys are A and P for Auto Scanning and the Arrow Keys for Skip Mode.
Note: 1. The toolbar must be visible for hotkey operations to work.
2. To use the keys designated as hotkeys for normal purposes, close the toolbar.
Auto Scanning
The Scan function switches at regular intervals among all ports accessible to the currently logged on user
to automatically monitor activity. Users can also limit the number of ports scanned with the Filter
function of the Sidebar. See “Scan” on page 40, and “Filter” on page 40, for more details.
• Setting the Scan Interval: The amount of time Auto Scan dwells on each port is set with the Scan
Duration setting (page 51).
• Invoking Auto Scan: With the toolbar open, tap the A key. Auto Scan cycles through the ports in
order, starting at the first port on the installation. An S appears in front of the Port ID Display to
indicate that the port is being accessed under Auto Scan Mode.
Icon Purpose
Click to skip to the first accessible port on the entire installation without recalling the Port Access
page.
Click to skip to the first accessible port previous to the current one without recalling the Port Access
page.
Click to begin Auto Scan Mode. The KVM switch automatically switches among the ports selected for
Auto Scanning with the Filter function. This allows activity monitor without switching among them
manually.
Click to skip from the current port to the next accessible one, without having to recall the Port Access
page.
Click to skip from the current port to the last accessible port on the entire installation without recalling
the Port Access page.
Click to recall the Port Access page.
Click to close the toolbar.
Click to invoke Panel Array Mode.
Not available on KVM1116P at local console
Click to cycle through the Adapter cable choices (Short, Medium, Long) used to connect the device to
the switch. Choice depends on the length of Cat 5e cable used for the connection. The line length on
the icon changes to indicate the selection.