Filter
Top Products
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 46
Adding a PDU in the KVM GUI main page
1. Go to the Device Management tab, select the PDU Devices and click Add.
2. Select the PDU Model.
3. Assign a name to the PDU.
4. User Name - Enter the PDU administrator user name.
5. Password - Enter your password.
6. Set the Scan Interval - This is the amount of time which the KVM switch checks outlet status
from the PDU (from 1 to 99 minutes). Short intervals are not recommended in order to minimize
impact on Telnet/HTTP users accessing the PDU.