Filter
Top Products
Overview
14
33003405 07/2007
Mounting the
Remote Output
Module
Mount the remote output module horizontally (so the F2DO logo on the front panel
is facing the user) to allow sufficient ventilation. We advise not to mount the remote
output module in a vertical position, because in this case additional measures are
required to ensure the device does not move.
The minimum distance to any neighboring device from another manufacturer is as
follows:
l vertical space of at least 100 mm (3.93 in.),
l horizontal space of at least 20 mm (0.78 in.).
Minimum clearances for the XPSMF2DO801 safety remote output module
(Compact Devices):
Note: The installation must be performed so that
l the device is not subject to heat emission from neighboring devices and
l devices with high EMC interference do not affect the XPSMF2DO801.
Heat emission and electromagnetic compatibility (EMC) must be checked for
devices from other manufacturers to ensure that operation of the remote output
device is not affected by any external device.
The overall installation space for all cables must also be taken into account to
ensure sufficient ventilation. Additional measures, such as installing heat
extraction fans, can be taken if the product’s housing becomes warm.
HIMA
HIMatrix
F30
by HIMA
HIMA
HIMatrix
F3
by HIMA
mm
inch
20
0.79
100
3.94
HIMA
HIMatrix
F31
by HIMA
HIMA
HIMatrix
F3
by HIMA