Filter
Top Products
Equipment Description
58
33003405 07/2007
Voltage Supply The most important tests and limit values for the voltage supply of the equipment are
listed in the following table:
IEC/EN 61131-2 Verification of DC Power Supply Characteristics
The power supply must meet alternatively the following
standards: IEC 61131-2 or SELV (Safety Extra Low
Voltage) or PELV (Protective Extra Low Voltage)
Fusing the XPSMF2DO801 safety remote output device
must be performed according to this manual only.
6.3.7.1.1 Voltage range test: 24 V DC, -20% to 25% (19.2 V DC to
30.0 V DC)
6.3.7.2.1 Momentary interruption immunity test: DC, PS 2: 10ms
6.3.7.4.1 Reversal of DC power supply polarity test
6.3.7.5.1 Backup duration withstand test: Test B, 1000 h, Lithium
battery is used for backup.