Filter
Top Products
Brief description of the functional devices
33003405 07/2007 73
Configuration of Ethernet Interfaces
Communication
Settings
For setting the communication parameters proceed as follows:
Step Action
1 Open the Extended tab.
2In the Speed Mode list, select Autoneg.
3In the Flow-Control Mode list, select Autoneg.
4 Select the Activate Extended Settings check box.
Result: The selected parameters are activated.
Note: The parameters of the Extended tab are explained in detail in the online
help of XPSMFWIN.
/Konfiguration/Abl-Mode/HIMatrix F35/COM
OK HelpApplyCancel
IP Settings License KeyExtended
Activate Extended ...
ARP Aging Time [s] 00
MAC Learning conservative
IP Forwarding
Speed Mode Autoneg
Flow-Control Mode Autoneg
Konfiguration
[0] HIMatrix F3 DIO 20_8 01_1
[0] HIMatrix F3 DIO 20_8 01_2
[250] Ablauf
[33] Abl-Mode
Abl-Mode
Protocols
Remote I/O
[0] HIMatrix F35
COM
Ethernet switch
Port configuration_1
CPU
[1] DO 8 DO 8
[2] CI 2 CI 2
[3] MI 24/8 FS1000 MI 24/800