Schneider Electric XPSMF2DO801 Network Hardware User Manual


 
Equipment Description
33003405 07/2007 39
Reset Button
Overview The device is equipped with a reset button. The reset button is used if the PC
connection password is lost.
Using Reset
Button
You can access the pushbutton through a small round opening on the upper side of
the housing, about 40...50 mm (1.57...1.97 in.) from the left rim.
Use the button only while you reboot the device and keep the button pressed for at
least 20 s. Pushing the reset button while the device is running produces no result.
Effect When you push the Reset button,
l all accounts are deactivated (except the default Administrator account
without password) and
l IP addresses and system ID (SRS) are set to default values.
Note: After activation of the reset button, values are modified and remain valid until
the next reboot. After the next reboot the previous values are restored. You can
enter new information, if necessary.