Filter
Top Products
Hawk 2XL Family Installation Guide, Rev. C 3
_______________________________________________________________________________________________________________________
You may find helpful the following booklet prepared by the FCC:
How to Identify and Resolve Radio-Television Interference
Problems
. This booklet is available from the Superintendent of
Documents, US Government Printing Office, Washington, DC
20402. Refer to publication number 004-000-00345-4.
Things you may need to install the drive
• Adequate power from your computer power supply
This drive requires 7.5 watts during typical operation, and 6.0
watts when at idle (not reading, writing or seeking). If this drive
is an "add-on" make sure the computer power supply can
supply enough extra power for this drive's needs.
• An antistatic wrist strap
You will need this to reduce the possibility of damaging your
drive by static discharge.
• A #2 Phillips screwdriver
You will need this screwdriver to open your computer and to
insert the drive mounting screws.
• A Torx Size TX-08 driver tool
If your drive has a front panel and you need to install the drive
in a conversion frame kit, this tool will be needed.
• A bootable DOS system diskette for the PC
You will need this diskette, which should contain the DOS
system files and the programs FDISK.EXE and FORMAT.EXE
to partition and format your new hard drive.