Filter
Top Products
❏ PCL mode
ITEM SYMBOL Hexadecimal & Decimal FUNCTION
[1] BEL [07] H [7] D Activates the bell. (Valid for PCL3+, PCL+D)
[2] BS [08] H [8] D Backspace one character.
[3] HT [09] H [9] D Moves to next horizontal tab.
[4] LF [0A] H [10] D Linefeeds after printing.
[5] VT [0B] H [11] D Linefeeds to next vertical tab position after printing.
[6] FF [0C] H [12] D Form feeds after printing.
[7] CR [0D] H [13] D Carriage return after printing.
[8] SO [0E] H [14] D Selects secondary font.
[9] SI [0F] H [15] D Selects primary font.
[10] ESC [1B] H [27] D Designate start of escape sequence.
[11] SP [20] H [32] D Space one character.
[12] DEL [7F] H [127] D To print the ASCII DEL character.
[13] ESC & a # C [1B,26,61,#,43]H Horizontal positioning by column.
[27,38,97,#,67]D
[14] ESC & a # H [1B,26,61,#,48]H Horizontal positioning by 1/720".
[27,38,97,#,72]D
[15] ESC & a # L [1B,26,61,#,4C]H Sets left margin.
[27,38,97,#,76]D
[16] ESC & a # M [1B,26,61,#,4D]H Sets right margin.
[27,38,97,#,77]D
[17] ESC & a # R [1B,26,61,#,52]H Vertical positioning by VMI.
[27,38,97,#,82]D
[18] ESC & a # V [1B,26,61,#,56]H Vertical positioning by 1/720".
[27,38,97,#,86]D
[19] ESC & d # D [1B,26,64,#,44]H Designate underline mode.
[27,38,100,#,68]D
[20] ESC & d @ [1B,26,64,40]H Cancel underline mode.
[27,38,100,64]D
[21] ESC & k # E [1B,26,6B,#,45]H
Designates/Cancels the auto- cancellation of underline.
[27,38,107,#,69]D
[22] ESC & k # F [1B,26,6B,#,46]H
Designates/Cancels the auto- cancellation of secondary font.
[27,38,107,#,70]D
Note: If # is set to "0" , current secondary font set
changes automatically to primary font when vertical
position changes .
[23] ESC & k # G [1B,26,6B,#,47]H Designates line termination .
[27,38,107,#,71]D # = 0 (30H) :CR=CR,LF=LF,FF=FF
# = 1 (31H) :CR=CR+LF,LF=LF,FF=FF
# = 2 (32H) :CR=CR,LF=LF+CR,FF=FF+CR
# = 3 (33H) :CR=CR+LF,LF=LF+CR,FF=FF+CR
[24] ESC & k # H [1B,26,6B,#,48]H Sets HMI(Horizontal motion index ).
[27,38,107,#,72]D - HMI is set by 1/120 inch.
- HMI is defined as the distance where the
print position moves when the character code
is input. If # is 12, the input characters are
printed in 10 cpi.
[25] ESC & k # S [1B,26,6B,#,53] H Designates character spacing.
[27,38,107,#,83] D - Character spacing is set.
# = 0 (30H) :Normal (10 cpi)
# = 1 (31H) :Double width(5 cpi)
# = 2 (32H) :Compressed (16.7 cpi)
# = 4 (34H) :12 cpi spacing
115
B. Control code summary (HP)