Filter
Top Products
Data length (serial interface)
This function selects the appropriate data length.
Stop bit (serial interface)
This function selects the appropriate number of stop bits.
Communication protocol (serial interface)
This function selects the appropriate communication protocol. Refer to the specification of
your host system for selecting proper communication protocol.
Note: The difference in XON/XOFF 1 and 2: XON/XOFF 1 protocol sends XON code (11h) to
host system at power-on while XON/XOFF 2 does nothing.
Communication speed (serial interface)
This function selects the appropriate baud rate for the data transmission speed.
64 STOP BIT
STOP BIT: 1 BIT
STOP BIT: 2 BITS
65 PROTOCOL
PROT.: DTR
PROT.: XON/OF1
PROT.: XON/OF2
PROT.: ETX/ACK
........... BUSY/READY protocol
........... Set XON/XOFF 1
........... Set XON/XOFF 2
66 BAUD RT
SPEED: 38400 B
SPEED: 19200 B
SPEED: 9600 B
SPEED: 4800 B
SPEED: 2400 B
SPEED: 1200 B
SPEED: 600 B
SPEED: 300 B
63 DATA LENGTH
LENGTH: 8 BITS
LENGTH: 7 BITS
52
5. Extended setup options (63-66)