Filter
Top Products
Connecting the computer
The printer has a parallel interface connector (Centronics) and a serial interface connector (RS232C).
Before you connect an interface cable to your computer, you need to know what type of printer
driver is supported by your software applications and what type of connector is needed to attach the
printer to the computer.
❏ Parallel Interface
36-pin plug
❏ Serial Interface
25-pin plug
Connecting the power cord
Check the power requirement printed on the rating plate on the rear of the printer before attaching
the power cord and turning on the printer. Both POWER and P.OUT lamps light up when the
printer is switched on correctly. The voltage selector should be set correctly as follows.
13
25
1
14
CAUTION
220-240V 120V
13
25
1
14
CAUTION
220-240V 120V
T5A 250V
T2.5A 250V(For European)
13
25
1
CAUTION
220-240V 120V
Voltage Selector
12
2. Setting up
120V:USA, Canada
230V:Europe,Asia, Oceania
Note
For continued protection against risk of fire and
destruction of Power PCB Assembly, switch the
voltage selector according to using voltage.