Filter
Top Products
B. Control code summary (HP)
ITEM SYMBOL Hexadecimal Decimal FUNCTION
[50] ESC ) s # W
[
1B,29,73,#,57] H DATA Download font descriptor.
[DATA]
[
27,41,115,#,87] D DATA - ESC ) s 0 W command resistors a blank LQ font.
The format is as follows
Symbol set : Byte 14-15 represent the symbol set # and
ID for the download character to be selected by [37]
ESC ( # id command.
Example:Roman-8
8U”
32 x 8 + 85 - 64 = 277 (01H,15H)
Point size(character height): Point size in decimal is
registered.
Typeface:Parameter used in the typeface selection
command is registered.
LQ/DRAFT:Print Quality, LQ or Draft is registered by
the following definition;
0:DRAFT 1:LQ
[51] ESC * b # M
[
1B,2A,62,#,4D] H Selects format the graphic data compression
[
27,42,98,#,77] D
- Raster graphics data are registered. (Valid for PCL3+, PCL+D)
# = 0 :compression off
# = 1 :mode 1
# = 2 :mode 2
# = 3 :mode 3
[52] ESC * b # W
[
1B,2A,62,#,57] H DATA Raster graphic data transmission
[DATA]
[
27,42,98,#,87] D DATA - Raster graphics data are registered.
[53] ESC * b # X [1B,2A,62,#,58]H Sets temporary graphics X-offset
[27,42,98,#,88]D
[54] ESC * b # Y [1B 2A 62 # 59]H Sets temporary graphics Y-offset
[27 42 98 # 89]D
[55] ESC * c # E [1B,2A,63,#,45]H Sets download character code
[27,42,99,#,69]D
Byte 0-1 0 0
Byte 2-3 0 0
Byte 3-4 0 0
Byte 5-6 0 0
Byte 7-8 0 0
Byte 9-10 0 0
Byte 10-11 0 0
Byte 12-13 0 0
Byte 14-15 [ SYMBOL SET (2 BYTES)]
Byte 16-17 0 0
Byte 18-19 [ POINT SIZE (2 BYTES)]
Byte 20-21 0 0
Byte 22-23 0 0
Byte 24-25 0 [ TYPEFACE ]
Byte 26-27 0 0
Byte 28-29 [LQ/DRAFT] 0
120