Seiko Group BP-9000 Printer User Manual


 
63
Cleaning
Minimum periodical cleaning will ensure the maximum performance from your printer. Do not
spill or splash cleaning liquid inside the printer. Please refer to the "Printer cover removal" on
page 64 to remove the covers for cleaning.
Before cleaning the printer, be sure to turn off the power and disconnect the power cord.
Power may be required to clean the platen.
Inside the printer
Thoroughly vacuum these areas.
Remove any collected paper dust and particles.
Exterior Casings
Clean with a soft cloth dampened
with a mild detergent.
FPC cable plastic binder
Make sure that the binder clamps the cable securely.
Platen
Inside the printer
Exterior Casings
Use a platen cleaner, or any weak alcohol solvents, to remove any
ink from the platen and bail rollers. Do not apply any other liquid
chemical to the platen.
Use a vacuum cleaner to remove paper dust and particles inside the
printer. A small brush is suitable for removing paper dust from
hard-to-get-at areas.
Clean with a soft cloth dampened with a mild detergent. Never
use organic solvents such as alcohol or thinner.
Even with a specified platen cleaner, frequent use of the liquid
is not recommended. Apply only when it is necessary.
8. Maintenance
8. Maintenance