Filter
Top Products
B. Control code summary (Setup options)
ITEM Mode Code & Hexadecimal n (Hex.) = selection
F = ITALY (ISO-15,0I)
10 = FRANC2 FRANCE 2(ISO-25,0F)
11 = GERMN2 GERMAN 2(HP SET,OG)
12 = SPAIN2 (ISO-85,6S)
13 = SPAIN3 (HP-SET,1S)
14 = JAPAN (ISO-14,0K)
15 = PORTU2 PORTUGAL(ISO-84,5S)
m:4 = (HP)
(SECONDARY FONT)
n: 0 =
LINE-DRAW (0L)
1 =
MATH-7 (0M)
n: 0 = 2 characters n: 3 = 8 characters
1 = 4 characters 4 = 10 characters
2 = 6 characters 5 = 12 characters
n: 0 = LQ n: 4 = Draft
1 = Draft 5 = Speed draft (SD)
2 = LQ 6 = Super speed draft (SSD)
3 = NLQ 7 = HQDR
n: 0 = No (normal)
1 = Yes (upside-down)
n: 0 = English n: 3 = Español
1 = Deutsch 4 = Italiano
2 = Français
By inserting this command before the setup terminate
codes, all the setup changes are not saved in the
EEPROM but only in the current memory.
Header w n
1B, 7C, 60, 02, 00, 77, n
Header x n
1B, 7C, 60, 02, 00, 78, n
Header y n
1B, 7C, 60, 02, 00, 79, n
Header z n
1B, 7C, 60, 02, 00, 7A, n
Header [7F]
1B, 7C, 60, 01, 00, 7F
[42] Tabulation
[43] Quality
[44] Invert display
[45] Display
language
[46] Dont save
126