Seiko Group BP-9000 Printer User Manual


 
Guide
Pivot
L-angle Hinge
Printer Cover
Open the front cover to an upright
position, then lift and remove the
cover.
Rear Cover
Open the rear cover from the
bottom edge of the cover and pull it
away from the printer to remove.
Paper Rack
Slide both paper guides to the
extreme left and right edges of the
paper rack. Raise the rear end to
stand vertically and lift straight
upward to remove.
Sound Seal Cover
Push out on the outer edge of the
sound seal cover where it connects
to the L-angle from the printer
while pushing the stud of the L-
angle out of the hole. Then remove
the whole cover.
65
8. Maintenance (Printer cover removal)