Filter
Top Products
5-3 Miscellaneous Notes
n
Notes on printing and paper feeding
(1)
Because the TM-L60 is a line printer, it automatically feeds paper after printing
the data.
When the line spacing is set to a small value, the paper may be fed more than
the set amount to print the data.
For example, when the line spacing is set to 10 dots
(10/180
inch), the printer
feeds just 10 dots for a carriage return; but 24 dots is fed when printing normal
characters using Font A. (Refer to Table 5-l.)
When all the characters on one line are rotated, refer to Table 5-2 for paper
feeding.
Table 5-1. Required Paper
Feed
Amount Dots
(When the line spacing is set to 10 dots)
Required Paper Feed Amount (dots)
Underline
without
with
Font A
Normal characters
24
32
Double-height
48
53
Double-width
24
32
Quadruple 48
53
Font B
Normal characters
17
24
Double-height
34
37
Double-width
17
24
Quadruple
34
37
Bit image 24
Table 5-2. Required Paper Feed Amount Dots
(When all the characters on one line are rotated)
Font A
Font B
Normal characters
Double-height
Double-width
Quadruple
Normal characters
Double-height
Double-width
Quadruple
Required Paper Feed Amount (dots)
12
24
12
24
9
18
9
18
18