Filter
Top Products
3-2. Printing on label paper
À
Open device RS-232C.
100 OPEN “COM 1: N81NN” AS #l
Á
Initialize the printer mechanism.
110 PRINT #1, CHR$(29); “<“;
Â
Send print mode
120 PRINT #l, “ABCDEF”; CHR$( 10);
Ã
Position label to start printing
130 PRINT#l, CHR$(12);
130 positions the next label printing. To position label to start printing, send
a
FF
code or GS <.
Ä
Print serial number counter
140 PRINT #l, CHR$(29); “CO”; CHR$(3); CHR$(0);
150 PRINT #l, CHR$(29); “Cl “; CHR$( 1); CHR$(0); CHR$( 10); CHR$(0);
CHR$(1); CHR$(1);
160 PRINT #l, CHR$(29); “C2”; CHR$( 1); CHR$(0);
170 FOR I = 1 TO 10
180 PRINT #l, CHR$(29); “c”;
190 PRINT #l, CHR$( 12);
200
NEXT I
In lines 140 to 160, it selects the print mode for the serial number counter.
140 selects print format for the serial number counter. CHR$(3) (value of m)
indicates the number of digits to be printed. CHR$(0) (value of n) specifies
the printing position within the entire range of printed digits. In case n = 0, it
prints with right adjusted.
150 selects counter operation range for the serial number counter.
In this
case, it counts up from 1 to 10 by 1.
160 sets the initial value of the counter. It indicates 1.
In line 170 to 190, it executes the serial
number counting and to position label
to start printing.
Always send a
FF
code after print data.
59