Filter
Top Products
[Notes]
l The syntax to be used when setting data in the print buffer
should be based upon GS CO.
l
For count mode, see GS Cl or GS C;.
With counting up
l
If the counter value set by this command goes out of the counter
operation range set by GS Cl or GS C;, it will be forced to
convert to the minimum by GS c.
With counting down
l
If the counter value set by this command goes out of the counter
operation range set by GS C1 or GS C;, it will be forced to
convert to the maximum by GS c.
GS f n
[Name]
Select font for HRI characters.
[Format] <1D>H<66>H<n>
[Range]
n = 0, 1
[Description]
Selects a font for the HRI characters used when printing a bar
code.
l
n
selects the font from the following table.
n
Font
0
Font A
1
Font B
l
HRI means Human Readable Interpretation.
[Notes]
l
HRI characters are printed at the position specified by GS H.
[Default]
n = 0
[Reference]
GSH
GS h n
[Name] Select height of bar code
[Format]
<1D>H<68>H<n>
[Range]
1
≤
n
≤
255
[Description]
Selects the height of the bar code.
l
n specifies the number of dots in the vertical direction.
[Default]
n= 162
51