Filter
Top Products
[Description]
The pulse defined by nl and n2 is output on connector pin m.
l
m is specified as follows:
m
Connector pin
0 Drawer kick-out connector pin 2
1
Drawer kick-out connector pin 5
l
ON time is nl X 2 ms and OFF time is n2 X 2 ms.
l The circuit on the user side should be designed so that the
drawer drive duty is as shown below.
ON time
(ON time + OFF time)
[Notes]
[Default]
It is recommended that n2 be four times as much as nl or more.
l If m is out of range, the printer reads n1 and n2 but does not
output a pulse.
Neither m, n1, nor n2 is defined.
ESC t n
[Name]
Select character code table
[Format]
<1B>H<74>H<n>
[Range]
[Description] Selects page n from the character code table.
[Default]
n = 0
[Reference]
APPENDIX D Character Code Tables
ESC u
n
[Name]
Transmit printer
status
[Format]
<1B>H<75>H<n>
[Range]
n = 0
[Description]
Transmit the current status of connector pin.
l
n is specified as follows:
n
Connector pin
0
Drawer kick-out connector pin 3
40