Filter
Top Products
l
Each bit of n is used as follows:
Value
Bit
Device
0
1
0
Printer
Invalid
Valid
1
Undefined
2 Undefined
3
Undefined
4
Undefined
5
Undefined
6
Undefined
7
Undefined
[Notes]
[Default]
l
Even when the printer is not selected, it may enter the BUSY
state due to printer operation.
n = 1
ESC @
[Name]
Initialize printer
[Format]
<1B>H<40>H
[Description]
Clears the data in the print buffer and resets the printer mode (to
the same state as when the power is turned on).
[Note]
l
The DIP switches are not read again.
l
The data in the receive buffer is not cleared.
l
Adjustment amount of the label starting position using < GS A >
command is not cleared.
ESC D [n]kNUL
[Name]
Set horizontal tab positions
[Format] <1B>H<44>H[<n>]k<00>H
[Range]
1 n 255
0 k 32
[Description]
Sets horizontal tab positions.
l
"n” specifies the column number from beginning of the line for
setting a horizontal tab position.
[n= (Column number) - 1]. For example, when a tab is to be set
at column 9, n = 8.
l
"k" indicates the total number of horizontal tab positions to be
Set.
33