Filter
Top Products
5-5 Cleaning the Head
n n
Cleaning
the
head
Clean the head according to the following procedure.
CAUTION:
l
Do not clean the head immediately after printing; the head may be hot.
Open the roll-paper cover, raise the auto-cutter and the head-open lever. If roll
paper is loaded, remove it from the head area.
Clean the heating element of the head with a cotton swab containing an alcohol
solvent (ethanol, methanol, or IPA).
l
Clean the cutter also with an alcohol solvent.
CAUTION:
l
Never touch the head; oils on your skin can damage the head.
Push the head-open lever down. Reload roll paper and close the roll-paper
cover. See 3-l.
23