Filter
Top Products
APPENDIX
APPENDIX A General Specifications
1. Printing specifications
Printing method:
Dot density:
Printing direction:
Print width:
Characters per line:
Thermal line printing
180 dpi
Uni-directional with friction feed
When the GS
FF
command is executed printing
is performed in the reverse direction.
54 mm, 384-dot positions
Normal paper:
32 (Font A)
42 (Font B)
Label paper:
30 (Font A)
40 (Font B)
Character spacing:
Printing speed:
0.28 mm (Font A)
0.28 mm (Font B)
Programmable by control command.
Approx. 12 lines/second (1/6 inch feed) (* 1)
Approx. 18 lines/second (1/9 inch feed) (* 1)
Approx. 2.0 inches/second (* 1)
Paper feeding speed:
Line spacing:
Printing speed may slow down depending on the
data transmission speed and combination of con-
trol commands.
Approx. 2.0 inches/second (* 1)
(Approx. 50.0 mm/second)
1/6 inch (4.23 mm) default
Programmable by control command.
(Minimum 1/360 inch)
(* 1): These speed values indicate approximate printing and paper feeding
speeds between the beginning and ending of a given label.
2.
Characters specifications
Character sets:
Alphanumeric: 95
Enlarged graphics:
International:
128 X 2 pages
32
61