Filter
Top Products
40
USING THE SCANNER MODE
The procedure for placing the original is the same as for copying. See "NORMAL COPYING". (p.18)
SCANNING USING THE KEYS ON THE MACHINE
The procedure for scanning using the [SCAN] key and [SCAN MENU] keys is explained in the following. When
scanning is performed by this method, the application that has been set in Button Manager will automatically start
and the scanned image will be pasted into the application.
1
Press the [SCAN] key.
When the SCAN
indicator lights up, the
machine enters scanner
mode.
When the machine enters
scan mode, either one of
the displays at left
appears depending on
the port that is used for
the connection.
If both USB 1.1 and USB 2.0 ports are connected,
press the scan key one or more times to select the
desired port. The ports are selected in the order "U_2",
"U_1", "Scan mode off".
2
Place the original in the document
feeder tray or on the document glass.
3
Press a [SCAN MENU] key to begin
scanning.
The display will show the
number of the [SCAN
MENU] key that you
pressed, and the number
will blink.
Scanner mode cannot be used at the following times:
• A misfeed has occurred (paper misfeed or original misfeed in the SPF/RSPF).
• The user programs are being used.
• The tray paper size is being set.
• Automatic exposure adjustment is in progress.
• When the toner save mode setting is being changed.
• The machine is being used in copy mode.
• The front or side cover is open.
Note
If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set copy
settings.
Note
SCAN
• To return to copy mode from scanner
mode, press the [SCAN] key, [CLEAR] key
( ) or [CLEAR ALL] key ( ).
• For limitations on copying and printing in
scanner mode, and scanner mode while
copying or printing, see
"OPERATION IN
COPY, PRINTER, AND SCANNER MODES".
(p.41)
• If you find it difficult to remove the original
from the document feeder tray, open the
feeding roller cover first and then remove
the original. If you remove the original
without opening the feeding roller cover, the
original may become dirty.
1
2
12
Note