Filter
Top Products
45
USER SETTINGS
5
7
Rotation copy
*2
0: OFF
1: ON
• When the auto paper select function is enabled
and there is no paper that is the same size as
the original and loaded in the same orientation,
this function will automatically select paper of
the same size that is loaded in the opposite
orientation, and rotate the image 90 degrees so
that it is copied on the paper in the correct
orientation.
• When the auto ratio select function is operating
and the original and paper are loaded in
opposite orientations, this function rotates the
image so that it is copied on the paper in the
correct orientation.
8
Auto paper select mode
0: OFF
1: ON
• This function automatically selects paper that is
the same size as the original placed in the
SPF/RSPF, or the same size as that selected
with the [ORIGINAL SIZE ENTER] key. The
function can be disabled.
9
Auto tray switching
0: OFF
1: ON
• If the paper runs out during printing and there is
paper of the same size and orientation in
another tray, this function automatically
switches to that tray (excluding the bypass
tray). The function can be disabled.
10
to 15 Auditing mode – See "Enabling Audit Mode". (p.50)
16
Erase width
adjustment
*2
1: 0"
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"
• Use this setting to set the width of erasure of
shadows that appear around the edges and at
the binding margin when a book or similar
original is copied.
17
Layout in 2 IN 1 copy
*2
1: Pattern 1
2: Pattern 2
• Use this setting to select the layout pattern
when two original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
18
Layout in 4 IN 1 copy
*2
1: Pattern 1
2: Pattern 2
3: Pattern 3
4: Pattern 4
• Use this setting to select the layout pattern
when four original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
19
Offset of paper output
tray
0: OFF
1: ON
• When enabled, this function offsets the position
in the paper output tray of interrupt copy jobs,
sets of copies during sort/group copy, and print
jobs when using the printer function.
20
Image rotation in
duplex copying
*3
0: OFF
1: ON
• When a one-sided vertical (portrait) original is
placed in a horizontal orientation (8-1/2" x 14"
or 11" x 17" size) for two-sided copying, the top
and bottom of the images on the front and back
of the paper will be opposite to each other.
21
Location of the
margin
*2,*3
1: Left edge
2: Top edge
• Use this setting to switch between the margin at
the top edge and the margin at the left edge.
22
Margin width
*2
1: 0"
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"
• Use this setting to set the margin width.
23
Resolution in Auto/Text
mode
1: 300dpi
2: 600dpi
• The copy resolution in auto and text mode is
normally 300 dpi. If high-quality copies are
preferred, use this setting to change the
resolution to 600 dpi.
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
*
2
On models with a dual function board.
*
3
On models with automatic two-sided copying.