Sharp AR-M205 All in One Printer User Manual


 
71
7
Chapter 7
ROUTINE MAINTENANCE
This chapter explains how to keep the machine operating smoothly, including viewing copy count, and scan count, 
the toner level indicator, and cleaning the machine.
CHECKING THE TOTAL OUTPUT
COUNT AND TONER LEVEL
CHECKING THE TOTAL OUTPUT COUNT
From the "0" display, you can check the total output count, total copy count, and total scan count as explained
below.
The total output count is all pages (for both printing and copying) printed by the machine. The total count, copy
count, total scan count, and copy count for each account (if enabled) are reset to 0 when the count reaches 50,000.
[Total output count]
Hold down the [0] key.
The total output count
appears in the display
while you hold down the
key.
The total output count
appears sequentially in
two parts while you hold
down the [0] key.
Example: Total number of pages output is 12,345.
[Total copy count]
Hold down the [READ-END] key ( ).
The total copy count
appears in the display
while you hold down the
key.
The count display and
counting method are the
same as for the total
output count.
[Total scan count]
Hold down the [ ] key.
The total scan count
appears in the display
while you hold down the
key.
The count display and
counting method are the
same as for the total
output count.
Each 11" x 17" size page is counted as two
pages.
During a copy run, pressing the [0] key
shows the number of completed copy
pages, not the total output count.
READ-END
Note
The total number of pages printed in printer
mode can be calculated by subtracting the
total copy count from the total output count.
READ-END
Note
READ-END