Filter
Top Products
44
CUSTOMIZING SETTINGS
(User programs)
The user programs allow you to customize the machine to match your needs.
USER PROGRAMS
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
Auto clear time
1: OFF
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec.
• "Auto clear time" automatically returns the copy
settings to the initial settings (p.12) when a
certain period of time elapses after a copy is
made. This program is used to select the period
of time. "Auto clear time" can also be disabled.
2
Preheat mode
1: 1 min.
2: 5 min.
3: 30 min.
4: 60 min.
5: 120 min.
6: 240 min.
• This function automatically switches the
machine to a low power consumption state if
the set duration of time elapses without the
machine being used when the power is on. The
POWER SAVE indicator lights up, however, the
keys on the operation panel can be used.
Normal operation automatically resumes when
a key on the operation panel is pressed, an
original is placed, a print job is received, or
scanning is begun from a computer.
3
Auto power shut-off
timer
1: 5 min.
2: 30 min.
3: 60 min.
4: 120 min.
5: 240 min.
• This function automatically switches the
machine to a state that consumes even less
power than preheat mode if the set duration of
time elapses without the machine being used
when the power is on. All lights except the
POWER SAVE indicator and ON LINE indicator
go off. To resume normal operation, press the
[START] key ( ). Normal operation also
resumes automatically when a print job is
received or scanning is begun from a computer.
While in auto power shut-off mode, no keys
(except the [START] key ( )) can be used.
4
Stream feeding mode
*1
0: OFF
1: ON
• When copying using the SPF/RSPF, during the
period of time that the SPF/RSPF indicator
blinks after an original has been scanned
(about 5 seconds), a subsequent original can
be placed and automatically fed into the
machine.
5
Auto power shut-off
setting
0: OFF
1: ON
• Use this setting to enable or disable auto power
shut-off.
6
Border line for 2 IN 1 / 4
IN 1
*2
1: OFF
2: Solid line
3: Broken line
• When copying multiple originals onto a single
sheet of paper (2 IN 1 / 4 IN 1 copy), this
function can be used to print a solid or broken
borderline around each original image.
*
1
On models with a SPF/RSPF.
*
2
On models with a dual function board.