Filter
Top Products
PROBLEMS AND SOLUTIONS
7-5
7
Printing does not take
place after reception.
Does a message appear in the
display instructing you to add toner
or paper? (Printing is not possible.)
Restore printing capability
as instructed by the display
message. Printing will begin.
"WHEN AN ALARM SOUNDS
AND A WARNING MESSAGE
IS DISPLAYED", page 7-3.
A received image
prints out blank.
Was the wrong side of the original
scanned in the transmitting machine?
Check with the operator of
the transmitting machine.
_
The received image
is faint.
Is the original faint? Ask the other party to re-
send the document using a
suitable exposure setting.
_
The received image
is distorted.
Were line conditions poor due to
thunder or another reason?
Ask the other party to send
the document again.
_
White or black lines
appear in the
transmitted image.
Is the document glass dirty? Clean the document glass .
Operation manual (for
general information and
copier operation), page 6-2.
A dial tone is not heard
through the speaker.
Is the volume set to "low"? Set the speaker volume to
"medium" or "high".
"Speaker volume settings",
page 8-6.
A ringing sound is not
made.
Has the ringer volume been turned
off?
Set the ringer volume to
"low", "medium", or "high".
"Speaker volume settings",
page 8-6.
Problem Check Solution Page