Sharp AR-FX12 Fax Machine User Manual


 
KEY OPERATOR PROGRAMS
8-3
8
USING THE KEY OPERATOR PROGRAMS
Follow these steps to configure the settings in the key operator programs.
1
Press the [CUSTOM SETTINGS] key.
2
Touch the [KEY OPERATOR PROGRAMS]
key.
3
Use the numeric keys to enter the five-digit
key operator code number.
For the factory default
setting for the key
operator code number,
see page 2 of the key
operator's guide.
4
Touch the [IMAGE SEND SETTINGS] key.
5
Touch the [OPERATION SETTINGS] key or
the [FAX SETTINGS] key to display the key
operator programs.
6
Select the desired program and configure
the setting.
Page 8-2 shows the programs that can be selected.
The settings for each of the programs are explained
on the following pages.
7
Press the [CA] key to exit the program.
Supplementary explanation of key operation for key operator programs
A The name of the program category or particular item to be set will appear on the touch key. The displayed item
is selected by touching the key.
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
C If the settings continue on the following screen(s), touch the and keys to move back and forth through
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the and keys.
KEY OPERATOR PROGRAMS
SENDER CONTROL
LIST PRINT
FAX DATA
RECEIVE/FORWA
DEFAULT
SETTINGS
KEY OPERATOR CODE
COPY SETTINGS
DOC. FILING
SETTING
CONTROL
DEVICE CONTROL
IMAGE SEND
SETTINGS
CONTROL
E SEND SETTINGS
OPERATION SETTINGS
FAX SETTINGS
I-FAX SETTINGS
15
(1 15)
A
KEY OPERATOR PROGRAMS
OPERATION SETTINGS
1/2
INITIAL RESOLUTION SETTING
THE NUMBER OF FILE NAME/
SUBJECT KEYS DISPLAYED SETTING
MUST INPUT NEXT ADDRESS
KEY AT BROADCAST SETTING
OK
DEFAULT DISPLAY SETTINGS
THE NUMBER OF DIRECT ADDRESS/
SENDER KEYS DISPLAYED SETTING
B
C
DE
6
6
T
hese keys and indicator are
available on setting screens that
require the entry of numerical values.