Filter
Top Products
User’s Guide 10-5
At the Fuser Unit
Clearing Paper Jams
4. Open the cover of the Fuser Unit and remove any jammed paper. If paper is torn, check
for any remaining torn pieces of paper.
5. Close the rear cover.
NOTE: Make sure that the levers at the rear of the printer, as shown in the diagram, are returned to the
positions they were in before clearing the jam.
The Fuser Unit is hot. Be careful not to touch it as you can get burned.
Make sure that the levers at both ends of the Fuser Unit are returned to the positions they were in
before clearing the jam.
If you let go of the cover of the Fuser Unit, it will return to its original position.