Filter
Top Products
Clearing Paper Jams
137
11. Trouble-
shooting
4
Replace the imaging film, making
sure that the flange goes into the rear
slot on the left side of the printing
compartment. Also, make sure that
the right, rear gear engages with the
gear below it.
5
Wind the film slightly (rotate the gear
on the right side of the rear spool) so
that there is no slack in the film. Make
sure that both edges of the film wind
onto the spool evenly.
3
Gently pull the jammed paper out of
the printing compartment.
6
Close the print compartment cover,
making sure it clicks into place.
• Caution! Close the cover slowly to
make sure it doesn't pinch your fin-
gers.
all-ux510A.book Page 137 Thursday, September 14, 2000 9:05 AM