Filter
Top Products
Making Copies
78
Note: If you place a large number of originals in the feeder, the memory
may become full before all of them can be scanned (MEMORY IS FULL
will appear in the display). If this happens, press the START key to copy
the originals which have been scanned, and then repeat the copy proce-
dure for the remaining originals, including the original which was being
scanned when the memory became full.
Copy Cut-off
When making a copy of a document that is longer than the printing
paper, use the copy cut-off setting to select whether the remaining part
of the document will be cut off or printed on a second page. The intial
setting is YES (cut off the remainder). To change the setting, follow
the steps below.
1
Press these keys:
The display will show:
COPY CUT-OFF
FUNCTION
6
2
Press 1 to set copy cut-off to YES (the
remaining part of the document will
not be printed), or 2 to set copy cut-
off to NO (the remaining part will be
printed on a second page).
The display will show:
INITIALIZE FILM
or
YES NO
1
2
3
Press the STOP key to return to the
date and time display.
STOP
all-ux510A.book Page 78 Thursday, September 14, 2000 9:05 AM