Filter
Top Products
Sending a Fax by Automatic Dialing
60
2
Press the Rapid Key corresponding to
the desired Speed Dial number.
• The name of the receiving party
will appear in the display. If no
name was stored, the fax number
will appear. (If the name or number
is incorrect, press the STOP key.)
• If the Speed Dial number is from 19
to 36, press the SHIFT key and
then press the Rapid key.
• The document will be
automatically transmitted once the
connection is established.
Rapid Key Dialing
If the number you want to dial has been stored for Automatic Dialing
as a Speed Dial number from 01 to 36, you can dial it by pressing the
corresponding Rapid Key.
1
Load the document(s).
The display will show:
Example: To dial Speed
Dial number 02, press
Rapid Key 02/20.
READY TO SEND
• Set the resolution and/or contrast if
desired.
Example: To dial Speed
Dial number 20, press the
SHIFT
key and press Rapid
Key 02/20.
RESOLUTION
SHIFT
01
19
02
20
03
21
04
22
05
23
06
24
07
25
SHIFT
01
19
02
20
03
21
04
22
05
23
06
24
07
25
SHIFT
all-ux510A.book Page 60 Thursday, September 14, 2000 9:05 AM