Filter
Top Products
Distinctive Ring (Requires Subscription to Service)
112
Distinctive Ring (Requires Subscription to
Service)
If you subscribe to a distinctive ring service from your telephone company, you
will need to turn on the distinctive ring function. When this is done, your fax
will signal voice calls by the normal ring pattern, and fax transmissions by a
special ring pattern. In the case of a fax transmission, your fax machine will
automatically answer the call and receive the fax.
The distinctive ring function is used with the reception mode set to FAX. When
your fax number is dialled, your fax machine will signal the call with a special
ringing sound, then answer automatically and begin reception after the
number of rings set with the Number of Rings setting (see page 98). When
your voice number is dialled, the fax machine will signal the call with the
normal ringing sound to let you know that you must answer personally.
The initial setting for distinctive ring is NO. If set to YES, Fax Duet distinctive
ring is supported.
Important:
♦ The distinctive ring function can only be used if you subscribe to a
distinctive ring service from your telephone company. Do not turn on
distinctive ring if you are on a normal line, as the fax machine will not
operate properly.
♦ If you turn on distinctive ring, the fax will not operate in TEL/FAX reception
mode.
1
Press once and twice.
2
Press once and 4 times.
3
Press once.
4
Press to turn on the function, or
to turn it off.
FUNCTION
1
2
Display:
OPTION SETTING
DISTINCTIVE
1=YES, 2=NO
The display briefly shows
your selection, then:
FAX SIGNAL RX
_FO-D60A_English_E4432.book Page 112 Thursday, February 19, 2004 1:42 PM