Filter
Top Products
Messages and Signals
130
FAX RX IN MEMORY A fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. The fax will
print out automatically when the problem is fixed.
FUNCTION MODE The FUNCTION key has been pressed.
HOLD The HOLD key has been pressed to place a call on
hold. Press the HOLD key again to resume the call.
INCORRECT FILM/
CHECK FILM
The wrong type of imaging film is loaded in the
machine. Printing is not possible. The machine can
only print when SHARP FO-9CR imaging film is
loaded.
INTERCOM A cordless handset is paging the fax machine (lift the
handset to talk), or the fax machine is paging a
cordless handset. The name and number of the
cordless handset appear alternately with
INTERCOM.
LINE ERROR Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see
Line Error
on page
123.
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
The memory is full. You may have too many
messages recorded in the answering system. To
erase messages, see page 67.
This message may also occur during fax reception if
too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional
message will indicate the problem), resolve the
problem so that printing can continue (see
Substitute
Reception to Memory
on page 104). If you are
attempting to transmit from memory, see
If the
memory becomes full
on page 95. If you are copying,
see
If MEMORY IS FULL appears
on page 105.
MEMORY PRINTING The fax is preparing to or printing out a document
from memory.
_FO-D60A_English_E4432.book Page 130 Thursday, February 19, 2004 1:42 PM