Sharp FO-D60 Fax Machine User Manual


 
Operating the Answering System
64
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press . Note that the general outgoing message
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
until the arrow in the display points to A.M.
PLAY/
HOLD
RECEPTION
MODE
4
Press and speak into the handset to record a message.
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press .
START/MEMORY
STOP
RECEPTION
MODE
The outgoing message will play (you can stop playback by pressing
).
It will not be possible to set the reception mode to A.M. if an outgoing
message has not been recorded.
STOP
FAX
TEL
A.M.
TEL/FAX
_FO-D60A_English_E4432.book Page 64 Thursday, February 19, 2004 1:42 PM