Filter
Top Products
Optional Answering System Settings
69
3. Answering
Machine
1
Press once and once.
2
Press once and twice.
3
Press .
4
Press to select YES (switch to
FAX mode), or to select NO.
5
Press to return to the date and time display.
FUNCTION
1
2
STOP
ON A.M. FAILURE
♦ NO (do not switch to FAX mode): The machine will answer after 20 rings,
after which it will wait to receive a remote command. Most callers will hang
up before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see
Remote Operations
on page 74).
The initial setting is NO . If you want to change the setting to YES, press the
panel keys as follows:
Display:
A.M. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
OGM ONLY MODE
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1
Press once and once.
2
Press once and once.
FUNCTION
OGM ONLY MODE
Display:
A.M. SETTING
_FO-D60A_English_E4432.book Page 69 Thursday, February 19, 2004 1:42 PM