Filter
Top Products
Remote Operations
78
Other remote operations
After listening to your messages, you can perform any of the following
operations by pressing the appropriate keys on the telephone.
Note: The following commands cannot be entered while messages are being
played back. If you do not want to wait until playback ends to enter a
command, first stop playback by pressing and , and then enter the
command.
Changing the fax reception mode
Select a new reception mode by pressing the keys as follows:
0
♦ A.M. mode: , , and .
♦ FAX mode: , , and .
♦ TEL mode: , , and .
Caution: If you select TEL mode, you will not be able to change the
reception mode again.
♦ TEL/FAX mode: , , and .
8 1
8
2
8 3
8 4
Recording a new outgoing message
1
Press and on the telephone.
2
When you hear a short beep, speak into the telephone to record the new
message.
• The message can be up to 15 seconds long. After 15 seconds (or earlier if
the machine detects silence after you finish speaking), you will hear a beep,
and the new message will be played back.
4
_FO-D60A_English_E4432.book Page 78 Thursday, February 19, 2004 1:42 PM