Sharp FO-D60 Fax Machine User Manual


 
Sending a Fax From Memory
94
Sending a Fax From Memory
You can scan a document into the fax’s memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
locations in just one operation.
When sending to multiple locations, only auto-dial numbers can be used to
dial the numbers of the receiving machines.
1
Load the document(s).
If desired, press to set the
resolution and/or contrast.
2
Press .
3
Press (or ) until the name of the number appears in the display
(if no name was stored, the number will appear).
4
Press to select the number.
5
Repeat Steps 3 and 4 for each of the other locations to which you wish
to send the fax (maximum of 20).
To check your selected locations, press to scroll through them. To
delete a location, scroll to the location and then press .
RESOLUTION
START/MEMORY
STOP
_FO-D60A_English_E4432.book Page 94 Thursday, February 19, 2004 1:42 PM