Filter
Top Products
Registering Cordless Handsets
57
2. Cordless
Handset
Programming a system PIN
The system PIN is a 4-digit ID number that is used to prevent unauthorized
registration of a cordless handset in a fax machine. When the system PIN is
set to a number other than 0000 (the initial factory setting), a cordless handset
must be registered using custom registration and the correct system PIN must
be entered on the cordless handset during registration. Follow these steps to
program a system PIN in the fax machine.
♦ To prevent other people from adding cordless handsets without your
authorization, it is recommend that you change the system PIN to a number
other than 0000. (Note that a cordless handset can be deleted without
entering the system PIN.)
1
On the fax machine, press once
and once.
2
Press once and once.
3
Press once.
4
Enter the current system PIN (4 digits).
• The system PIN is initially set to 0000 at the factory.
• To clear a mistake, press .
5
Press .
6
Enter the new system PIN that you wish to program (4 digits).
7
Press .
FUNCTION
START/MEMORY
START/MEMORY
Fax machine display:
DECT SETTING
SYSTEM PIN
OLD PASSWORD
_FO-D60A_English_E4432.book Page 57 Thursday, February 19, 2004 1:42 PM