Sharp MX-7000N Scanner User Manual


 
71
Internet fax mode
There are two special mode menu screens in Internet fax mode. Touch the keys to switch between the two
screens.
The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in
"Scan mode, USB memory mode, Data entry mode" (page 70).
1st screen 2nd screen
(1) [2in1] key
SENDING TWO PAGES AS A SINGLE PAGE (2in1)
(page 94)
(2) [Transaction Report] key
CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 97)
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special mode menu screen. Touch this key when you wish
to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special mode menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special mode menu
screen.
Internet Fax/Special Modes
Card Shot
OK
Dual Page
Scan
Slow Scan
Mode
Quick File
Mixed Size
Original
Erase
Job
Build
File
2in1
Program
Timer
1
2
Internet Fax/Special Modes
OK
Transaction
Report
2
2
(1)
(2)
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
Scan/Special Modes
OK
Erase
Edge
10
(0~20)
mm
Centre
Erase
Edge+Centre
Erase
OKCancel
Edge
Erase
(C)
(A)
(B)