Filter
Top Products
-26
Turning the Power Off
(Putting the Projector into Standby
Mode)
1 Press STANDBY on the pro-
jector or
STANDBY on the
remote control, then press that
button again while the confi rma-
tion message is displayed, to
put the projector into standby
mode.
2 Unplug the power cord from the
AC outlet after the cooling fan
stops.
• The power indicator on the projector
blinks in blue while cooling.
• The power indicator changes to red
when the projector fi nishes cooling.
On-screen display
Info
• Do not unplug the power cord during projection or
cooling fan operation. This can cause damage due to
the rise in internal temperature, as the cooling fan also
stops.
• When connected to equipment such as an amplifi er, be
sure to turn off the power to the equipment connected
fi rst and then to the projector.
Turning the Projector On/Off (Continued)