Filter
Top Products
-28
3.
Adjusting the Projector Angle
Using the Adjustment Feet
The inclination of the projector can be adjusted using
the adjustment feet when the projector is placed on
an uneven surface or when the screen is slanted.
1 Lift the projector to adjust its
height while pressing the foot
releases.
2 Remove your hands from the
foot releases after the height has
been adjusted.
• The angle of projection is adjustable up
to 5 degrees from the surface on which
the projector is placed.
3 Rotate the adjustment feet to
make fi ne adjustment.
• Rotate the adjustment feet to gradually
raise or lower the projector. Ensure that the
projector is stable and does not wobble.
Note
•
When the height of the projector is adjusted, the
image may become distorted, depending on the
relative positions of the projector and the screen.
Info
•
Do not apply too much pressure on the projec-
tor when the adjustment feet are stuck out.
•
When lowering the projector, be careful not to
get your fi ngers caught in the area between
the adjustment foot and the projector.
•
Hold the projector fi rmly while lifting or carrying.
• Do not hold by the lens area.
4. Adjusting the Vertical
Position of the Image
You can move the projected image vertically by
turning the lens shift dial.
Info
• Do not turn the lens shift dial beyond the
upper limit and lower limit positions. This may
cause the projector to malfunction.
Image Projection (Continued)
Foot releases
Adjustment feet
Lens shift dial
Down
Up