Filter
Top Products
Basic Operation
-29
Operating with the Remote Control
Switching the Iris Setting
This function controls the quantity of the
projected light and the contrast of the image.
Press
IRIS.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
Note
• For details, see page 37.
Adjusting the Contrast
1 Press CONTRAST.
2 Press or to adjust the con-
trast.
3 Press ENTER.
Note
• For details, see page 36.
Adjusting the Quantity of Light
1 Press BRIGHT.
2 Press or to adjust the quan-
tity of light.
3 Press ENTER.
Note
• For details, see page 36.
Freezing a Moving Image
1 Press FREEZE.
• The projected image is frozen.
2 Press FREEZE again to return
to the moving image from the cur-
rently connected device.
Selecting the Picture Mode
You can select the appropriate picture mode to best
match the projected image you are watching.
Press
PICTURE MODE.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
Note
• For details, see page 36.
FREEZE
ENTER
PICTURE MODE
CONTRAST
BRIGHT
IRIS
Adjustment buttons
(///)
MEDIUM MODEHIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
STANDARD NATURAL DYNAMIC
MEMORY MOVIE2 MOVIE1