Filter
Top Products
-37
Useful Feature
This function allows you to select the desired gamma
position.
See page 40 for details.
Note
• Gamma can be adjusted in greater detail with
“Gamma” on the menu screen.
This function controls the quantity of the projected light
and the contrast of the image.
Note
• You can also use IRIS on the remote control
to change the Iris. (See page 29.)
Note
• When “Lamp Setting” is set to “Eco+Quiet”, the
power consumption will decrease and the lamp
life will extend. (Projection brightness decreases
approximately 20%.)
Selectable items Description
High Brightness High brightness is given priority over
high contrast.
Medium Mode Intermediate mode between high con-
trast and high brightness.
High Contrast High contrast is given priority over high
brightness.
Select-
able items
Bright-
ness
Fan
sound
Power
consumption
(When using
AC 100V)
Lamp Life
Bright 100% Normal 320W Approx.
2,000
hours
Eco +
Quiet
Approx.
80%
Low 265W Approx.
3,000
hours
Menu operation ⇒ Page 34
“Advanced” allows you to make even fi ner adjustments
to the image so that it appears just the way you want
it to.
To display the Advanced menu, select “Advanced” and
press ENTER.
Note
• When the “Advanced” settings are displayed,
select “Advanced” again and press
ENTER
to return to the “Picture” menu.
Select “C.M.S.” (Color Management System) in the
“Advanced” menu and then press
ENTER.
This function adjusts each of the six main colors that
comprise the color wheel, altering their “Hue”, “Satura-
tion”, or “Value”.
Adjusting “Hue”, “Saturation”, or “Value”.
Press or to select either “Hue”, “Saturation”, or
“Value” and then press
ENTER.
Select the color to be adjusted with or and
adjust it with or .
• When you press ENTER, the adjustment bar for the
selected system color will be displayed at the bottom
of the screen. Use this bar to make adjustments while
viewing the effects on-screen.
Example of adjusting the “Hue”
• When “Saturation” is selected, the selected color
becomes lighter ( ) or thicker ( ).
• When “Value” is selected, the selected color be-
comes darker ( ) or brighter ( ).
• To reset the adjustment values of each color to the
default settings, select “Yes” in “Reset” and press
ENTER.
Main colors
button button
Red Closer to magenta Closer to yellow
Yellow Closer to red Closer to green
Green Closer to yellow Closer to cyan
Cyan Closer to green Closer to blue
Blue Closer to cyan Closer to magenta
Magenta Closer to blue Closer to red
Selecting the Gamma Position
Switching the Iris Setting
Lamp Setting
Using the Advanced
Adjusting the Colors
Selectable items Description
C.M.S.-Hue Sets the hue of the main colors.
C.M.S.-Saturation Sets the Saturation of the main colors
C.M.S.-Value Sets the Value of the main colors.
Reset The adjustments of “Hue”, “Saturation”
and “Value” of all colors are reset to the
default setting.