Filter
Top Products
5
Printer Properties
How to Use the
Online Manual
Printer Properties Print Maintenance Troubleshooting
"Paper Settings" Dialog Box (part 2)
Paper Size
Select an appropriate paper size for your document from menu.
Custom Paper
When "(Custom)" is selected for "Paper Size" setting, the
following dialog box will appear, and you can specify the
desired paper size.
Width
Enter a number to customize the width to the custom paper you
wish to use.
Length
Enter a number to customize the length to the custom paper you
wish to use.
millimeters / inches
Select the units of measurement for paper size settings: either
"millimeters" or "inches".
!
The document size must be smaller than the selected
(loaded) paper. If not, printing will occur over the edge of
the paper causing the machine to become internally dirty.
!
Ledger, A3, or B4 sized paper cannot be used on the
printer. To print these image sizes select "Fit To Page"
setting by checking the box, or reduce the image size by
specifying the ratio at "Zoom[%]" setting.
"N-Up Printing", "Fit To Page", and "Zoom[%]" settings are
not available when you select "COM10", "DL", "C6",
"Invitation A2", "Japanese Hagaki", "Banner Letter", or
"Banner A4" sized paper.
Size
8.5" x 11"
8.5" x 14"
7.25" x 10.5"
210mm x 297mm
148mm x 210mm
8.5" x 11"
210mm x 297mm
4.125" x 9.5"
4.375" x 5.75"
110mm x 220mm
114mm x 162mm
3" x 5"
4" x 6"
5" x 8"
105mm x 148mm
100mm x 148mm
Min. : 3.00" x 5.00" (76.2mm x 127.0mm)
Max. : 11.70" x 17.00" (297.2mm x 431.8mm)
Paper
Letter
11" x 17"
Ledger
Legal
Executive
297mm x 420mmA3
A4
A5
257mm x 364mm B4
182mm x 257mm B5
Banner Letter
Banner A4
COM10
Invitation A2
DL
C6
Index card 3" x 5"
Index card 4" x 6"
Index card 5" x 8"
A6
Japanese Hagaki
(Custom)
Paper sized larger than 8.5" x 14" (215.9mm x
355.6mm) cannot be used in this printer. You can print
the image by using the reduction feature of the
"Zoom[%]" setting.