Filter
Top Products
19
Part1
QUICK START GUIDE
Part2 Part3
6. VAT/tax2 status programming (Press
s
to skip. / Press
A
to terminate.)
7. VAT/tax3 status programming (Press
s
to skip. / Press
A
to terminate.)
8. VAT/tax4 status programming (Press
s
to skip. / Press
A
to terminate.)
REGIST. TYPE
06 NORMAL
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the VAT/tax 4 status does not need
to be changed from "TAX4 NO". Otherwise, press
:
key to display "TAX4 YES".
Each time
:
key is pressed, the display shows
"TAX4 YES" and "TAX4 NO" alternately.
Default setting is "NO".
SELECT OF TAX4
TAX4 NO
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the VAT/tax 3 status does not need
to be changed from "TAX3 NO". Otherwise, press
:
key to display "TAX3 YES".
Each time
:
key is pressed, the display shows
"TAX3 YES" and "TAX3 NO" alternately.
Default setting is "NO".
SELECT OF TAX3
TAX3 NO
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the VAT/tax 2 status does not need
to be changed from "TAX2 NO". Otherwise, press
:
key to display "TAX2 YES".
Each time
:
key is pressed, the display shows
"TAX2 YES" and "TAX2 NO" alternately.
Default setting is "NO" for dept. code 1 to 10 and 21
to 99, and "YES" for dept. code 11 to 20.
SELECT OF TAX2
TAX2 NO
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_1(En) 06.7.22 9:20 AM Page 19