Sharp XE-A303 Cash Register User Manual


 
61
Part3
FOR THE MANAGER
Part2Part1
3. Footer print on receipt programming (Press
s
to skip. / Press
A
to terminate.)
4. Entry of amount tendered programming (Press
s
to skip. / Press
A
to terminate.)
LIMIT DIGITS
33 8
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the entry of amount tendered does
not need to be changed from "NON
COMPULSORY". Otherwise, press
:
key to
display "COMPULSORY".
Each time
:
key is pressed, the display shows
"COMPULSORY" and "NON COMPULSORY"
alternately. In case of
c
and
b
programming,
"INHIBIT" is displayed instead of "NON
COMPULSORY".
Default setting is "NON COMPULSORY" or "INHIBIT".
AMOUNT TENDERED
NON COMPULSORY
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the footer print on receipt does not
need to be changed from "NO". Otherwise, press
:
key to display "YES".
Each time
:
key is pressed, the display shows
"YES" and "NO" alternately.
Default setting is "NO".
This programming decides whether or not the
machine should print a message at the foot of a
receipt when a specified key is used. With regard
to programming method of footer logo message,
refer to "Logo messages" section on page 25.
FOOTER PRINT
33 NO
s
(3) Press the
s
key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_3(En) 06.7.22 4:41 PM Page 61