Filter
Top Products
C H A P T E R 6
ChangingSMARTInksettings
30 smarttech.com/kb/170578
3. Change settings:
Control Procedure Notes (if any)
Start SMARTInk
when youlog on
Select thecheck box to
automatically start SMARTInk
when youlog on to the computer.
If you clear the check box,
SMARTInk doesn’t start when you
log on to the computer andyou’re
unable to write or draw over
applications or create SMARTInk
Notes.
Youcan manually start SMARTInk
(see Getting started with
SMARTInk on page 3).
Hide SMARTInk
toolbars until you
draw over a
window
Select thecheck box to hide the
SMARTInk toolbar on an application
window until you draw over the
window.
When you erase the ink, the
SMARTInk toolbar will disappear
again.
Hide SMARTInk
toolbars for full
screen video
Select thecheck box to hide the
SMARTInk toolbar on videos in full
screen mode.
The SMARTInk toolbar appears
when youpress the video, or write or
draw over it.
SMARTInk Note
opacity
Select theopacity of SMARTInk
Notes in the drop-down list.
Select 25%, 50% or 75% to see
through SMARTInk Notes.
Use drop
shadows on
SMARTInk
Select thecheck box to adddrop
shadows to theink youwrite ordraw
to give the ink a 3D appearance.
Selecting this check box can
decrease performance onslower
computers.
Erase ink after
it’s converted to
text
Select thecheck box to erase ink
after you insert it as text in an
application.
Use detailedink
thickness
Select thecheck box to select the
thickness of ink using a slider.
OR
Clear thecheck box to select the
thickness of ink from four options.
4. Press Apply, and thenpress OK.